Mac Restore Dmg To Usb
2021年3月4日Download here: http://gg.gg/oj7wz
Apple Configurator 2 User GuideWhat a revive does
In the Apple Configurator 2 device window, select the Mac to be restored. Do one of the following: Choose Actions Restore, then click Restore. Control-click the selected device, then choose Actions Restore, then click Restore. Select BaseSystem.dmg in Disk Utility’s sidebar, and then click the Restore button in the main part of the window. Drag the BaseSystem.dmg icon into the Source field on the right (if it isn’t.
In very rare circumstances, such as a power failure during a macOS upgrade, a Mac may become unresponsive and so the firmware must be revived. A revive updates the firmware and updates recoveryOS to the latest version. A revive is designed to not make any changes to the startup volume, the user’s data volume, or any other volumes.What a restore does
On your Mac, open up Disk Utility. Click on the USB Drive on the left. On the right pane, go to the Restore tab. Click on the Browse button and locate the.dmg installer for OS X Lion. (ie macosx10711a390.dmg) 4. Once you have it chosen, click and drag your USB Thumbdrive from the left pane to the Destination box.
You must restore the firmware and erase the internal flash storage if:
*
You can’t start the Mac from the startup volume or the recoveryOS
*
Reviving the firmware is unsuccessful
WARNING: Back up your data before you restore your Mac. When you restore a Mac, you are restoring the firmware, updating recoveryOS to the latest version, and erasing and installing the latest version of macOS on your internal storage. When this process is complete, any data on any internal volumes is unrecoverable.
This task covers the following Mac computers with Apple silicon:
*
Mac mini (M1, 2020)
*
MacBook Pro (13-inch, M1, 2020)
*
MacBook Air (M1, 2020)Requirements
To perform this process, you must have:
*
The latest version of Apple Configurator 2 installed on a Mac and have internet access
You may need to configure your web proxy or firewall ports to allow all network traffic from Apple devices to Apple’s network 17.0.0.0/8. For more information on the ports used by Apple products, see the Apple Support article Use Apple products on enterprise networks.
*
A supported USB-C to USB-C charge cable, such as the one sold by Apple (may not be available in all countries or regions)
*
A supported USB-A to USB-C cable
The USB-C cable must support both power and data. Thunderbolt 3 cables aren’t supported.Revive or restore processes
The revive or restore processes involve the following steps:
1. Launching Apple Configurator 2 on the second Mac and connecting the Mac computers
2. Restarting the Mac using a special key sequence
3. Using Apple Configurator 2 to do one of the following:
*
Revive the firmware and reinstall the latest version of recoveryOS.
*
Restore the firmware, erase all data, and reinstall the latest version of recoveryOS and macOS.Step 1: Set up the Mac with Apple Configurator 2 and connect the USB-C cable
*
Verify that:
*
You have the latest version of Apple Configurator 2 installed
*
The Mac is plugged into a power source
*
You can connect to the internet
*
Plug in (along with any adapters needed) the USB-C cable.
*
Launch Apple Configurator 2.Step 2: Prepare the Mac mini
*
Plug in a monitor so you can see when the process is complete.
*
Disconnect the Mac mini from power for at least 10 seconds.
*
Press and hold the power button.
*
Reconnect power while still holding the power button.
*
Release the power button.
The status indicator light should be amber in color.
Note: You won’t see any screen activity from the Mac mini.Step 2: Prepare the Apple notebook computer
*
Press the power button.
*
While holding down the power button, at the same time press all three of the following keys for about 10 seconds:
*
The right Shift key
*
The left Option key
*
The left Control key
*
After 10 seconds, immediately release the three keys but continue to hold down the power button until it appears in Apple Configurator 2.
Note: You won’t see any screen activity from the Apple notebook computer.Step 3: Revive the firmware and install the latest recoveryOS
*
In the Apple Configurator 2 device window, select the Mac whose chip firmware you want to revive and whose recoveryOS you want updated to the latest version.
*
Do one of the following:
*
Choose Actions > Advanced > Revive Device, then click Revive.
*
Control-click the selected device, then choose Advanced > Revive Device, then click Revive.
Note: If you lose power to either Mac during this process, begin the revive process again.
*
Wait for the process to complete. During this process, an Apple logo will appear and disappear.
*
After the process completes, your Mac will reboot.
Important: When you revive the firmware, you must verify that the process was successful because Apple Configurator 2 may not alert you.
*
Quit Apple Configurator 2, then unplug any adapters and cables.Step 3: Restore the firmware, erase all data and reinstall the latest version of recoveryOS and macOS
*
In the Apple Configurator 2 device window, select the Mac to be restored.
*
Do one of the following:
*
Choose Actions > Restore, then click Restore.
*
Control-click the selected device, then choose Actions > Restore, then click Restore.
Note: If you lose power to either Mac during this process, begin the restore process again.
*
Wait for the process to complete. During this process, an Apple logo will appear and disappear.
*
After the process completes, your Mac will restart.
Important: When you restore the Mac, you must verify that the process was successful because Apple Configurator 2 may not alert you.
*
If the process was successful, you’re presented with the macOS Setup Assistant.
*
Quit Apple Configurator 2 and unplug any adapters and cables.See alsoBack up and restore iPhone and iPad devices in Apple Configurator 2Boot process of Mac computers
Summary: In this blog, we will share two methods to create a disk image-the first one using macOS Catalina’s Disk Utility and the second using a Mac data recovery application.Read on to know the steps and benefits of these methods. Also, make sure you avail the free trial version of Stellar Data Recovery application.
Disk image of an external or an inbuilt Mac storage drive is immensely helpful in recovering files in case the source drive fails or dies. You can create a disk image of your APFS or HFS drive on a larger storage medium and access it at a later point of time.Create a Disk Image Using Disk Utility on macOS Catalina
macOS Catalina’s inbuilt Disk Utility provides an option to select a mounted storage drive be it internal or external SSD/HDD and create a disk image (.DMG) file to a location other than the source disk. The systematic steps to create a disk image of a drive using Disk Utility are as follows:
*Open DiskUtility and select the storage drive from the sidebar
*Go to File > New Image > Image from “DriveName”
*Give a name to your disk image file and provide a destination to save the file
*Click the Format popup menu, then choose your required option
*If you want to limit the access of this disk image file, then click the Encryption popup menu to set a password for its access
*Click Save to continue the imaging process
*Click Done once the imaging process is over
Disk Utility mounts the image file’s disk icon on the desktop and sidebar of Finder. You can use the mounted image file to open its content.Create a Disk Image Using a Mac Data Recovery Utility on macOS Catalina
The third-party data recovery utility, Stellar Data Recovery Professional for Mac also allows you to create a disk image (.DMG) file of the inbuilt Mac storage drive/volume or an external storage device. The logical steps to create a disk image of a drive using the utility are as follows:
Step 1)Download and install Stellar Data Recovery Professional on your Mac with installed macOS Catalina (or later macOS/OSX)
Step 2) Launch the software and select RecoverData from the main interface
Step 3) Click the ‘2nd‘ icon present at the top of the interface and select CreateImage
Step 4) From the “CreateImage” screen, select a drive or a volume to create an image fileMount Dmg To Usb
Step 5) If you wish to create an image of the entire selected storage location, click Next
Step 6) If you wish to select the range to create an image, click the AdvancedSettings
*From the “SelectRangetoCreateImage” screen, drag the sliders to define the starting and ending sectors of the image file
*Click Close and then click Next
Step 7) In the “CreatingMediaImagetoSave” dialog box, locate the destination where you wish to save the image file
Step 8) In the “SaveAs” text box, type the disk image name and then click Save
This completes the disk imaging process using the software. Unlike Disk Utility, macOS Catalina does not mount this image file for you to access its data. Nevertheless, you can keep this newly created disk image as a backup and use it to recover data at the time of data loss.Restore Dmg To Usb Mac TerminalRecover Data from a Disk Image Using the Software
The methodical steps to use the .DMG file for data recovery are as follows:
Step 1) Launch the software and select Recover Data from the main interface
Step 2) Click the ‘2nd’ icon present at the top of the interface and select Load ImageMac Restore Dmg To Usb ModeMac Restore Dmg To Usb Pc Camera
Step 3) From the “Load Image” screen, select the .DMG file or else click Add to add the image fileDmg To Usb On Windows
Step 4) Click Scan to start the recovery process
Step 5) Once the scan is over, preview and select the required files then click Recover
Step 6) Specify the save location and click Save. You can find the recovered data in the saved location. Watch the below video for the process.Conclusion
We hope the blog helped you in understanding the practical details of how you can create a disk image file of a storage drive on macOS Catalina. By implementing Disk Utility, you can generate a disk image file and can open the automatically mounted image file from the saved location. On the contrary, by using Stellar Data Recovery Professional for Mac, you create a disk image file and use it to scan and recover lost, deleted, or inaccessible files.
Unlike Disk Utility, the software allows you to select the specific region of the drive for image creation. We recommend this method to recover files from a storage drive that is too big in size. For instance, if your storage drive has the data storage capacity of say 8 TB, then you need to recover data in portions. Free download the software to create an image, scan, and preview files. Register the software to save the recoverable files.
Download here: http://gg.gg/oj7wz
https://diarynote.indered.space
Apple Configurator 2 User GuideWhat a revive does
In the Apple Configurator 2 device window, select the Mac to be restored. Do one of the following: Choose Actions Restore, then click Restore. Control-click the selected device, then choose Actions Restore, then click Restore. Select BaseSystem.dmg in Disk Utility’s sidebar, and then click the Restore button in the main part of the window. Drag the BaseSystem.dmg icon into the Source field on the right (if it isn’t.
In very rare circumstances, such as a power failure during a macOS upgrade, a Mac may become unresponsive and so the firmware must be revived. A revive updates the firmware and updates recoveryOS to the latest version. A revive is designed to not make any changes to the startup volume, the user’s data volume, or any other volumes.What a restore does
On your Mac, open up Disk Utility. Click on the USB Drive on the left. On the right pane, go to the Restore tab. Click on the Browse button and locate the.dmg installer for OS X Lion. (ie macosx10711a390.dmg) 4. Once you have it chosen, click and drag your USB Thumbdrive from the left pane to the Destination box.
You must restore the firmware and erase the internal flash storage if:
*
You can’t start the Mac from the startup volume or the recoveryOS
*
Reviving the firmware is unsuccessful
WARNING: Back up your data before you restore your Mac. When you restore a Mac, you are restoring the firmware, updating recoveryOS to the latest version, and erasing and installing the latest version of macOS on your internal storage. When this process is complete, any data on any internal volumes is unrecoverable.
This task covers the following Mac computers with Apple silicon:
*
Mac mini (M1, 2020)
*
MacBook Pro (13-inch, M1, 2020)
*
MacBook Air (M1, 2020)Requirements
To perform this process, you must have:
*
The latest version of Apple Configurator 2 installed on a Mac and have internet access
You may need to configure your web proxy or firewall ports to allow all network traffic from Apple devices to Apple’s network 17.0.0.0/8. For more information on the ports used by Apple products, see the Apple Support article Use Apple products on enterprise networks.
*
A supported USB-C to USB-C charge cable, such as the one sold by Apple (may not be available in all countries or regions)
*
A supported USB-A to USB-C cable
The USB-C cable must support both power and data. Thunderbolt 3 cables aren’t supported.Revive or restore processes
The revive or restore processes involve the following steps:
1. Launching Apple Configurator 2 on the second Mac and connecting the Mac computers
2. Restarting the Mac using a special key sequence
3. Using Apple Configurator 2 to do one of the following:
*
Revive the firmware and reinstall the latest version of recoveryOS.
*
Restore the firmware, erase all data, and reinstall the latest version of recoveryOS and macOS.Step 1: Set up the Mac with Apple Configurator 2 and connect the USB-C cable
*
Verify that:
*
You have the latest version of Apple Configurator 2 installed
*
The Mac is plugged into a power source
*
You can connect to the internet
*
Plug in (along with any adapters needed) the USB-C cable.
*
Launch Apple Configurator 2.Step 2: Prepare the Mac mini
*
Plug in a monitor so you can see when the process is complete.
*
Disconnect the Mac mini from power for at least 10 seconds.
*
Press and hold the power button.
*
Reconnect power while still holding the power button.
*
Release the power button.
The status indicator light should be amber in color.
Note: You won’t see any screen activity from the Mac mini.Step 2: Prepare the Apple notebook computer
*
Press the power button.
*
While holding down the power button, at the same time press all three of the following keys for about 10 seconds:
*
The right Shift key
*
The left Option key
*
The left Control key
*
After 10 seconds, immediately release the three keys but continue to hold down the power button until it appears in Apple Configurator 2.
Note: You won’t see any screen activity from the Apple notebook computer.Step 3: Revive the firmware and install the latest recoveryOS
*
In the Apple Configurator 2 device window, select the Mac whose chip firmware you want to revive and whose recoveryOS you want updated to the latest version.
*
Do one of the following:
*
Choose Actions > Advanced > Revive Device, then click Revive.
*
Control-click the selected device, then choose Advanced > Revive Device, then click Revive.
Note: If you lose power to either Mac during this process, begin the revive process again.
*
Wait for the process to complete. During this process, an Apple logo will appear and disappear.
*
After the process completes, your Mac will reboot.
Important: When you revive the firmware, you must verify that the process was successful because Apple Configurator 2 may not alert you.
*
Quit Apple Configurator 2, then unplug any adapters and cables.Step 3: Restore the firmware, erase all data and reinstall the latest version of recoveryOS and macOS
*
In the Apple Configurator 2 device window, select the Mac to be restored.
*
Do one of the following:
*
Choose Actions > Restore, then click Restore.
*
Control-click the selected device, then choose Actions > Restore, then click Restore.
Note: If you lose power to either Mac during this process, begin the restore process again.
*
Wait for the process to complete. During this process, an Apple logo will appear and disappear.
*
After the process completes, your Mac will restart.
Important: When you restore the Mac, you must verify that the process was successful because Apple Configurator 2 may not alert you.
*
If the process was successful, you’re presented with the macOS Setup Assistant.
*
Quit Apple Configurator 2 and unplug any adapters and cables.See alsoBack up and restore iPhone and iPad devices in Apple Configurator 2Boot process of Mac computers
Summary: In this blog, we will share two methods to create a disk image-the first one using macOS Catalina’s Disk Utility and the second using a Mac data recovery application.Read on to know the steps and benefits of these methods. Also, make sure you avail the free trial version of Stellar Data Recovery application.
Disk image of an external or an inbuilt Mac storage drive is immensely helpful in recovering files in case the source drive fails or dies. You can create a disk image of your APFS or HFS drive on a larger storage medium and access it at a later point of time.Create a Disk Image Using Disk Utility on macOS Catalina
macOS Catalina’s inbuilt Disk Utility provides an option to select a mounted storage drive be it internal or external SSD/HDD and create a disk image (.DMG) file to a location other than the source disk. The systematic steps to create a disk image of a drive using Disk Utility are as follows:
*Open DiskUtility and select the storage drive from the sidebar
*Go to File > New Image > Image from “DriveName”
*Give a name to your disk image file and provide a destination to save the file
*Click the Format popup menu, then choose your required option
*If you want to limit the access of this disk image file, then click the Encryption popup menu to set a password for its access
*Click Save to continue the imaging process
*Click Done once the imaging process is over
Disk Utility mounts the image file’s disk icon on the desktop and sidebar of Finder. You can use the mounted image file to open its content.Create a Disk Image Using a Mac Data Recovery Utility on macOS Catalina
The third-party data recovery utility, Stellar Data Recovery Professional for Mac also allows you to create a disk image (.DMG) file of the inbuilt Mac storage drive/volume or an external storage device. The logical steps to create a disk image of a drive using the utility are as follows:
Step 1)Download and install Stellar Data Recovery Professional on your Mac with installed macOS Catalina (or later macOS/OSX)
Step 2) Launch the software and select RecoverData from the main interface
Step 3) Click the ‘2nd‘ icon present at the top of the interface and select CreateImage
Step 4) From the “CreateImage” screen, select a drive or a volume to create an image fileMount Dmg To Usb
Step 5) If you wish to create an image of the entire selected storage location, click Next
Step 6) If you wish to select the range to create an image, click the AdvancedSettings
*From the “SelectRangetoCreateImage” screen, drag the sliders to define the starting and ending sectors of the image file
*Click Close and then click Next
Step 7) In the “CreatingMediaImagetoSave” dialog box, locate the destination where you wish to save the image file
Step 8) In the “SaveAs” text box, type the disk image name and then click Save
This completes the disk imaging process using the software. Unlike Disk Utility, macOS Catalina does not mount this image file for you to access its data. Nevertheless, you can keep this newly created disk image as a backup and use it to recover data at the time of data loss.Restore Dmg To Usb Mac TerminalRecover Data from a Disk Image Using the Software
The methodical steps to use the .DMG file for data recovery are as follows:
Step 1) Launch the software and select Recover Data from the main interface
Step 2) Click the ‘2nd’ icon present at the top of the interface and select Load ImageMac Restore Dmg To Usb ModeMac Restore Dmg To Usb Pc Camera
Step 3) From the “Load Image” screen, select the .DMG file or else click Add to add the image fileDmg To Usb On Windows
Step 4) Click Scan to start the recovery process
Step 5) Once the scan is over, preview and select the required files then click Recover
Step 6) Specify the save location and click Save. You can find the recovered data in the saved location. Watch the below video for the process.Conclusion
We hope the blog helped you in understanding the practical details of how you can create a disk image file of a storage drive on macOS Catalina. By implementing Disk Utility, you can generate a disk image file and can open the automatically mounted image file from the saved location. On the contrary, by using Stellar Data Recovery Professional for Mac, you create a disk image file and use it to scan and recover lost, deleted, or inaccessible files.
Unlike Disk Utility, the software allows you to select the specific region of the drive for image creation. We recommend this method to recover files from a storage drive that is too big in size. For instance, if your storage drive has the data storage capacity of say 8 TB, then you need to recover data in portions. Free download the software to create an image, scan, and preview files. Register the software to save the recoverable files.
Download here: http://gg.gg/oj7wz
https://diarynote.indered.space
コメント